top_text
Hospital Incubators Manufacturers and Hospital Incubators Suppliers Exporters From India
Product Quality Requirements
Quick Feedback
Associated Manufacturer Partners India
Products Catalogue
         
cntnt-top
 
 
Analytical Lab Instruments Exporters India
 
Download Catalogue
engineer
 
 
 
Facebook
 
twttr
 
Skype
 


Hospital Incubators

Hospital Incubator, B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.) : Double walled construction. Inner chamber made of anodized aluminium sheet/stainless steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.

Temperature is controlled by a micro processor digital temperature controller cum indicator from 5° C to 50° C ± 1° C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.

Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, temp. controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.

Note : Use of a suitable Voltage Stabilizer is essential.

Size of chamber in mms (WxHxD) Capacity (cu ft.)
500 x 800 x 415 6.10
565 x 865 x 550 10.00
650 x 900 x 550 12.00
700 x 900 x 650 15.00

Optional Arrangements Available :

  • Digital temp. indicator-cum-controller with computer data logger.
  • Thermo-hygro-graph.
  • Timer : 0-24 hrs.
  • Day/night cycle.
  • CO2 / Air mixture inlet nozzle.
  • Audio-visual alarm.
  • Automatic Voltage Stabilizer 3 KVA.

 


Humidity System (Steam) for BOD Incubator JEQ-4(C1) : BOD Incubator can be provided with humidity arrangement. Humidity is created by condensation of steam generated by heaters dipped in water. Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

[1]
 

Carbon Dioxide Incubator

JEQ-4G

Carbon Dioxide Incubator : Inner chamber measuring 45 x 71 x 45 cm. made of stainless steel sheet. A full view inner glass door is provided along with outer double walled door provided with magnetic gasket. Inlet nozzle for Carbon Dioxide or Air mixture is also provided. Temperature range 5° C above ambient to 60° C ± 2° C. Complete with pressure gauge, inlet/outlet of air/gas, cord plug etc. Workable on 220V AC 50Hz single phase.

Optionals :

  • Air compressor
  • Carbon Dioxide cylinder with rubber pipes

See Enlarge



Orbital Shaking Incubator

JEQ-4O

Orbital Shaking Incubator: Specially designed to have a combined operation of Incubation and shaking as well as integral shaker mechanism, eccentric orbital drive provides horizontal orbital motion agitation. Incubator is double walled. Exterior of mild steel finished in powder coated. Interior made of stainless steel. Chamber illumination with fluorescent light.

Glass-wool insulation between the two walls. Temperature is controlled by Digital Display Temperature Controller cum Indicator. Forced air circulation is provided. The platform is mounted on heavy duty springs with lotus clamps and S.S. top. Speed is continuously variable from 50 to 250 RPM and displayed on a Digital Speed Meter (optional). It works on 220V AC 50Hz single phase.

Temperature Range
: Ambient +5° C to 600C

Capacity Flasks
250 ml 9
250 ml 16
250 ml 25
250 ml 36
500 ml 9
500 ml 16
500 ml 25
500 ml 36


Optional :
  • Digital Speed Meter
  • Digital Timer of 999 minutes
  • Digital temp. indicator-cum-controller.
  • Digital temp. indicator-cum-controller with computer data logger.

JEQ-4 (OR) : Temperature range is 5° C to 60° C.

See Enlarge



B.o.d. Incubator

JEQ-4C

B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.) : Double walled construction. Inner chamber made of anodized aluminium sheet/stainless steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.

Temperature is controlled by a micro processor digital temperature controller cum indicator from 5° C to 50° C ± 1° C.  Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.

Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, temp. controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.

Note : Use of a suitable Voltage Stabilizer is essential. 

Size of chamber in mms (WxHxD) Capacity (cu ft.)
500 x 800 x 415 6.10
565 x 865 x 550 10.00
650 x 900 x 550 12.00
700 x 900 x 650 15.00

 Optional Arrangements Available :

  • Digital temp. indicator-cum-controller with computer data logger.
  • Thermo-hygro-graph.
  • Timer : 0-24 hrs.
  • Day/night cycle.
  • CO2 / Air mixture inlet nozzle.
  • Audio-visual alarm.
  • Automatic Voltage Stabilizer 3 KVA.


Humidity System (Steam) for BOD Incubator JEQ-4(C1) :  BOD Incubator can be provided with humidity arrangement. Humidity is created by condensation of steam generated by heaters dipped in water. Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.


See Enlarge



Hybridization Incubator

JEQ-4H

Hybridization Incubator: Inside made of stainless steel temp. Range 5° C above ambient to 90° C. Temp. controlled by pid controller. This chamber has air circulating fan to ensure uniformity of temp. A carrier to hold bottles ( 6 number of 60 mm diameter x 200 mm depth) can be easily placed on front of rotator mechanism any bottle can be taken out easily from the carrier. The carrier rotates with bottles parallel to the door at a variable speed of 2 to 16 RPM. Viewing glass window in the top allows inspection of the specimen inside the chamber.


See Enlarge



Walk-in- Incubator

JEQ-11W

Walk-In- Incubator JEQ-11W
Designed for vast number of incubation applications. Can be installed even in hallway room or wherever convenient. Design feature includes enameled mild steel sheet exterior, aluminum /stainless steel, interior ventilators, internal lighting, exhaust fan etc. Suitable insulated 300 mm sq. Inspection window at the door permits inside view with -out opening the door. Complete with panel. Pre fabricated at factory assembled at site. Complete with cord and plug to work on 220 V single phase 50 Hz power supply. Temperature range from 5° C above ambient to 60° C ± 1° C. Controlled by digital indicator cum controller.

Available sizes
W x H x D
a) 1.2x2.3x1.2 meter 
b) 2.3x2.3x2.3 meter    

Walk-In- Incubator -JEQ-W2

Same as JEQ-11W but with controlled humidity up to 95% ± 5%

Available sizes
W x H x D
a) 1.2x2.3x1.2 meter 
b) 2.3x2.3x2.3 meter    

Walk-In- Incubator -JEQ-W3

Same as JEQ-11W but temperature range 10° C to 60° C.

Available sizes
W x H x D
a) 1.2x2.3x1.2 meter 
B) 2.3x2.3x2.3 meter

Optional : 

  • Digital temp. indicator-cum-controller with computer data logger 

See Enlarge



Platelet Agitator With Incubator

JRS-4P

Double walled construction, outer made of mild steel duly powder coated  and inner chamber made of stainless steel sheet.  Platelet incubator with agitator has Microprocessor based PID temperature controller for controlling accuracy of +/- 0.1° C.  Platelet incubator with agitator provide smooth platelet agitation of 70+/-2 RPM to increase platelet viability. Forced air cooling unit in platelet incubator with agitator maintains uniform temperature.

OPTIONAL:

  • Platelet incubator with agitator also has 7 days temperature chart recorder.
  • Digital temp. indicator-cum-controller with computer data logger.

See Enlarge



Water Bath Incubator Shaker (metabolic Shaking Incubator)

JEQ-4F

Temperature range from room temperature to 100° C, Thermostatic control with an accuracy of plus minus 0.5° C Double walled inside made of Stainless steel 304 Quality and outside Mild steel sheet painted in epoxy powder coating. Oscillating tray is riding on ball rollers. Oscillator speed range 40 to 140 strokes. Built-in L-shape thermometer. To work on 220/230 volts A.C. Shaking Tray size : Inside (Stainless Steel 304 Qlty.)

Size of chamber in inchs (WxHxD)

Capacity (KW)

275 x 275 x  75mM

6 Ltrs

275 x 275 x 150mm

12 Ltrs.

405 x 300 x 150mm

18 Ltrs. 


See Enlarge




[1]